Stealth-cam STC-IR1 Manuel d'utilisateur télécharger pdf (Page 24)

STC-IR1

www.stealthcam.net Toll Free 877-269-8490

Using the camera in PIR detection mode

o Mount the camera to tree or other sturdy object using either the

supplied tree screw or mounting strap (Please refer to the

Mounting Suggestions section in this manual).

o Open the front housing & move the switch to the ON position. At

this point you have 30 seconds to make any program

adjustments.

o After 30 seconds the camera's green test light will begin

blinking.

This is your indication to leave the coverage area within one minute.

o After one minute the camera will be in Detection mode.

o Based on your program the camera will take between 1-3

pictures or a 10 second AVI video. The camera will then time

out between 1 - 60 minutes also based on your setting.

Note: The time between motion detection and the camera taking

pictures may vary due to lighting conditions, program

setting and battery power level.

o The IR lighting will only activate in low light conditions. (Below

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

Pas de commentaire

Stealth-cam STC-IR1 Manuel d'utilisateur Page 24